Quick Answer

A security camera spec sheet is the manufacturer’s official list of performance figures for that model. Read each number with the test conditions printed next to it: resolution and sensor size, lens and field of view, IR range, WDR in dB, minimum illumination in lux, IP and IK ratings, PoE class, codec and bitrate, storage, ONVIF profiles, and DORI or IEC 62676-4 pixel density. Figures such as WDR in dB are not a reliable way to compare cameras from different vendors unless the test method is stated. The table below maps each common spec to what it means, what to look for, and which of our tools helps.

This page is the spec-sheet hub. For a deeper look at megapixels, 1080p vs. 4K, and working distance, use the security camera resolution comparison and security camera resolution explained. For coverage at a distance, use the lens distance calculator. We do not invent example values; the worked example below is quoted from an official Axis datasheet.

Security Camera Specs at a Glance

Each row is a common datasheet line. The example figures in this table come from official IEC, IEEE/Ethernet Alliance, ONVIF, and Axis pages, accessed on November 11, 2026. Where a tool on this site helps you apply the spec, it is linked in the last column.

Spec What it means What to look for Which of our tools helps
Resolution and sensor size How many pixels the camera can output, and the size of the image sensor that collects the light. On the official AXIS P1465-LE datasheet, the 16:9 resolution list starts at 1920×1080 (2 MP) and the sensor is listed as a 1/2.8″ progressive scan RGB CMOS with a 2.9 µm pixel size. The pixel count at the distance that matters, not only the megapixel headline. Confirm the aspect ratio (this datasheet lists 16:9, 16:10, and 4:3 ranges) and read the sensor format and pixel size together. Resolution comparison; resolution explained; megapixels by scene width
Lens focal length and field of view Focal length and the horizontal and vertical angles the lens covers. The same AXIS P1465-LE datasheet lists two lens options: a 3-9 mm varifocal lens with a 117°-37° horizontal field of view, and a 10.9-29 mm varifocal lens with a 29°-11° horizontal field of view. Match field of view to the scene width you need to cover, and check minimum focus distance (0.5 m on the 9 mm option, 2.5 m on the 29 mm option in that datasheet). Lens distance calculator
IR range / night vision How far the camera’s infrared illumination is specified to reach. Axis describes IR reach as assessed outdoors at night for real objects in real scenes. The P1465-LE datasheet lists OptimizedIR with 850 nm LEDs and a range of reach of 40 m (9 mm) or 80 m (29 mm), “or more depending on the scene.” With IR on, minimum illumination is listed as 0 lux. The wavelength, the lens option the range applies to, and the “depending on the scene” caveat. A range figure without those conditions is hard to compare. Use the lens and resolution tools above to check detail at that distance; IR range is not the same as identification distance.
WDR (dB) Wide dynamic range is the camera’s ability to show detail in both very bright and very dark parts of one scene. Axis states that dynamic range is usually specified as a dB value, but actual WDR performance is difficult to measure and also depends on the scene, motion, and image processing. The P1465-LE datasheet lists Forensic WDR: up to 120 dB depending on scene. The test method, not only the dB number. IEC 62676-5 defines how performance values in camera specifications should be described and measured. If the method is not stated, do not treat two vendors’ dB figures as comparable. No dB converter on this site; compare methods, then use the resolution and lens tools for the scene.
Minimum illumination (lux) The lowest light level at which the datasheet says the camera can produce an image, often split into color and black-and-white. Official Axis figures are tied to conditions such as 50 IRE and the lens F-stop. On P1465-LE (9 mm): color 0.06 lux at 50 IRE F1.6; B/W 0.01 lux at 50 IRE F1.6. IRE level, F-stop, frame rate, and whether WDR was on. The AXIS P1385-B datasheet shows the same camera family listing different lux values when the lens, frame rate, or WDR setting changes. No lux calculator on this site; read the test conditions on the datasheet.
IP rating (IEC 60529) IEC 60529 classifies degrees of protection provided by enclosures (IP Code). Axis’s official datasheet guide, citing IEC 60529, treats it as a two-digit code: the first digit is solid objects and dust, the second is water. IP66 is dust tight plus powerful water jets; IP67 is dust tight plus brief immersion under defined conditions. AXIS P1465-LE is listed as IP66/IP67, citing IEC/EN 60529. The exact code and the standard cited. IP66 and IP67 are different water tests (jets vs. brief immersion). If you need both, look for a datasheet that lists both, as this one does. Enclosure rating is a product claim; pair it with power planning in the PoE tool if the camera is outdoors.
IK rating (IEC 62262) IEC 62262 classifies degrees of protection provided by enclosures against external mechanical impacts (IK code). Axis’s official guide, citing IEC/EN 62262, lists impact energy by level, including IK10 at 20 J and IK11* at 50 J. AXIS P1465-LE is listed as IK10, citing IEC/EN 62262. The IK code and the standard cited. For IK11, Axis notes that the manufacturer must indicate energy, mass, and drop height of the striking element. No IK calculator on this site; use the official IK table in the section below.
PoE class and power (IEEE 802.3af/at/bt) How much power the camera draws from a PoE switch or midspan, and which IEEE PoE type and class it requires. The Ethernet Alliance overview of 802.3bt lists PD power by class, from 3.84 W (Class 1) up to 71.3 W (Class 8). AXIS P1465-LE is listed as IEEE 802.3af/802.3at Type 1 Class 3, typical 7.9 W, max 12.95 W. Class, type, typical watts, and maximum watts. A higher-class camera will not get full power from a lower-class PSE, as the Ethernet Alliance notes. PoE budget calculator; UPS runtime calculator
Codec and bitrate (H.264 / H.265) The video compression format and how bitrate can be controlled. The P1465-LE datasheet lists H.264 (Baseline, Main, and High Profiles), H.265 (Main Profile), Motion JPEG, Axis Zipstream, and controllable frame rate and bandwidth with VBR, ABR, and MBR in H.264/H.265. Which codecs are listed, and whether bitrate is controllable. Bitrate, not megapixels alone, drives network and storage load. IP camera bandwidth calculator
Storage (microSD / NVR) Where the camera can write video. The P1465-LE datasheet lists support for a microSD/microSDHC/microSDXC card and recording to network-attached storage (NAS). An NVR is a separate local recorder on the network. On-camera card, NAS, and whether a local NVR is part of the system. Card size alone does not tell you how many days you will keep. NVR storage calculator; how long cameras keep footage; recording without internet
ONVIF profiles (S / G / T) ONVIF profiles describe which interoperable features a device or client supports. Official ONVIF pages define Profile S as basic video streaming, Profile G as edge storage and retrieval, and Profile T as advanced video streaming, including H.264/H.265. The P1465-LE datasheet lists Profiles G, M, S, and T. The specific profile letters, not only the word ONVIF. Profile S is in a deprecation process, with a last date of product conformance submissions of March 31, 2027, according to ONVIF’s Profile S page. Confirm the profile on the official ONVIF pages linked in the ONVIF section.
DORI / IEC 62676-4 DORI (detection, observation, recognition, identification) is the set of operational requirements Axis attributes to IEC 62676-4:2014, expressed as pixel density. Axis lists 25, 63, 125, and 250 px/m for those four levels. IEC 62676-4:2025 uses a different set of levels and densities, which Axis also documents. Which edition the datasheet or planning tool uses (2014 DORI vs. 2025), and the pixel density at your target distance. These figures are for human viewing, not automatically for analytics or thermal cameras. Resolution comparison; lens distance calculator

Always open the manufacturer’s official datasheet for the exact model you are buying. Firmware, lens options, and regional variants can change a published figure.

Resolution and Sensor Size

Resolution is the pixel count the camera can output. Sensor size is the format of the chip that collects the light, often written as a fraction of an inch, sometimes with a pixel size in micrometers. On the official AXIS P1465-LE Bullet Camera datasheet, the 16:9 list starts at 1920×1080, the product is described as 2 MP, and the sensor is a 1/2.8″ progressive scan RGB CMOS with a 2.9 µm pixel size.

A higher megapixel number does not, by itself, tell you whether you can recognize a person at a given distance. That depends on pixel density in the scene, which is the DORI / IEC 62676-4 topic below. For side-by-side resolution comparisons and a fuller explanation of 1080p, 2K, and 4K, go to the resolution comparison and resolution explained pages rather than repeating those charts here.

Lens Focal Length and Field of View

Focal length, usually in millimeters, and field of view, usually in degrees, describe how much of the scene the lens covers. The same official P1465-LE datasheet lists two lens options. The 3-9 mm varifocal lens has a horizontal field of view of 117°-37° and a vertical field of view of 59°-20°, with a minimum focus distance of 0.5 m (1.6 ft). The 10.9-29 mm varifocal lens has a horizontal field of view of 29°-11° and a vertical field of view of 16°-6°, with a minimum focus distance of 2.5 m (8.2 ft).

The shorter focal-length option is the wider view; the longer option is the narrower tele view. To relate angle, distance, and coverage for a planning scenario, use the security camera lens distance calculator.

IR Range and Night Vision

Many datasheets list an infrared, or IR, range for night illumination. Axis’s official “IR in surveillance” paper says camera-integrated and standalone illumination normally use IR light with a wavelength of 850 nm, and that the range of a visual camera with IR illumination depends on the resolution of the camera and how far the illumination can reach, “as assessed outdoors at night, for real objects in real scenes.”

The P1465-LE datasheet lists OptimizedIR with power-efficient, long-life 850 nm IR LEDs. Range of reach is 40 m (131 ft) on the 9 mm option and 80 m (262 ft) on the 29 mm option, “or more depending on the scene.” With IR illumination on, minimum illumination is listed as 0 lux. Treat the distance as a scene-dependent illumination reach, not automatically as an identification distance.

WDR in dB, and Why Vendor Figures Are Hard to Compare

Wide dynamic range, or WDR, is about scenes that contain both very dark and very bright areas, such as a doorway with daylight outside. Axis’s official WDR white paper (March 2026) says the dynamic range capability of a camera is usually specified as a dB value, but actual WDR performance is difficult to measure and also depends on the complexity of the scene, the amount of movement, and the image processing capability of the camera. Axis also states that a camera with a certain specified dynamic range could outperform a competing camera that has a higher dB value, and that neither the dB value nor the “reach” expresses the full dynamic range capability.

The official P1465-LE datasheet lists “Forensic WDR: Up to 120 dB depending on scene.” That is a vendor figure with a scene caveat, not a universal score. IEC 62676-5:2018 defines recommendations and requirements for representation and measuring methods of performance values in instruction manuals, brochures, and specifications of video surveillance camera equipment. Unless a datasheet states the test method — and two vendors used the same method — do not treat their WDR dB numbers as comparable.

Minimum Illumination (Lux) and Test Conditions

Minimum illumination is listed in lux and is often split into color and black-and-white. The number is incomplete without the test conditions. On the official P1465-LE datasheet, the 9 mm option lists color 0.06 lux at 50 IRE F1.6 and B/W 0.01 lux at 50 IRE F1.6; the 29 mm option uses F1.7 for the same lux figures. With IR illumination on, the value is 0 lux.

Those conditions matter. The official AXIS P1385-B Box Camera datasheet lists different lux values for the same camera when the lens, frame rate, or WDR setting changes. With an optional F1.4 lens at 1080p 25/30 fps with Forensic WDR and Lightfinder 2.0, color is 0.05 lux at 50 IRE, F1.4. At 1080p 50/60 fps with Lightfinder 2.0 and the same F1.4 lens, color is 0.1 lux at 50 IRE, F1.4. With an optional F0.9 lens under the 25/30 fps Forensic WDR condition, color is 0.02 lux at 50 IRE, F0.9. If a datasheet omits IRE, F-stop, frame rate, or method, the lux number is not a fair comparison.

IP Rating (IEC 60529) and IK Rating (IEC 62262)

IEC 60529 is the international standard for degrees of protection provided by enclosures (IP Code). Axis’s official datasheet guide, citing IEC 60529, describes the code as two digits: the first is protection against solid objects and dust, the second is protection against water. In that official table, first-digit 6 is dust tight (no ingress of dust). Second-digit 6 is powerful water jets; second-digit 7 is brief immersion in water under defined conditions of pressure and time; second-digit 8 is continuous submersion under conditions the manufacturer must specify, which must be harsher than IPX7.

Those water tests are different. IP66 describes jets; IP67 describes brief immersion. If you need both, look for a datasheet that lists both ratings. The official P1465-LE datasheet lists an IP66/IP67 casing and cites IEC/EN 60529 IP66/IP67.

IEC 62262:2002, consolidated with amendment 1:2021, classifies degrees of protection against external mechanical impacts (IK code). Axis’s official guide, citing IEC/EN 62262, publishes this energy table. The P1465-LE datasheet lists IK10 and cites IEC/EN 62262 IK10.

IK code Impact energy (Axis official guide, citing IEC/EN 62262)
IK01 0.14 J
IK02 0.2 J
IK03 0.35 J
IK04 0.5 J
IK05 0.7 J
IK06 1 J
IK07 2 J
IK08 5 J
IK09 10 J
IK10 20 J
IK11* 50 J

The Axis guide marks IK11 with an asterisk: impact up to 50 J, and the manufacturer must indicate energy, mass, and drop height of the striking element.

PoE Class and Power (IEEE 802.3af / at / bt)

Power over Ethernet is defined in the IEEE 802.3 family. The official Ethernet Alliance overview of 802.3bt states that 802.3af (2003) could provide 13 W to devices, 802.3at (2009) increased that to 25.5 W, and 802.3bt raises available power to 71.3 W. Power levels are defined as classes. A new high-power powered device (PD) will not get full power from an older or lower-power power sourcing equipment (PSE) unit.

The following figures are taken from that Ethernet Alliance overview (classes 1-8). Use them to read the class line on a datasheet, then size a switch budget with the PoE budget calculator. For runtime if the power goes out, use the UPS runtime calculator.

Class Type / standard PSE guaranteed power PD maximum power
Class 1 Type 1 (802.3af) 4 W 3.84 W
Class 2 Type 1 (802.3af) 7 W 6.49 W
Class 3 Type 1 (802.3af) 15.4 W 13 W
Class 4 Type 2 (802.3at) 30 W 25.5 W
Class 5 Type 3 (802.3bt) 45 W 40 W
Class 6 Type 3 (802.3bt) 60 W 51 W
Class 7 Type 4 (802.3bt) 75 W 62 W
Class 8 Type 4 (802.3bt) 90 W 71.3 W

The official P1465-LE datasheet lists Power over Ethernet IEEE 802.3af/802.3at Type 1 Class 3, typical 7.9 W, max 12.95 W. Quote the typical and maximum watts, not only the class name.

Codec and Bitrate (H.264 / H.265)

The codec is the compression format used to send and store video. The official P1465-LE datasheet lists H.264 (MPEG-4 Part 10/AVC) Baseline, Main, and High Profiles; H.265 (MPEG-H Part 2/HEVC) Main Profile; Motion JPEG; Axis Zipstream technology in H.264 and H.265; and controllable frame rate and bandwidth with VBR, ABR, and MBR in H.264/H.265.

Bitrate, together with resolution and scene complexity, determines how much network capacity and storage you need. We do not invent typical bitrate values here. To estimate bandwidth and storage load from the bitrate you actually plan to use, open the IP camera bandwidth calculator and the NVR storage calculator.

Storage: microSD and NVR

Datasheets usually say whether the camera can write to an onboard memory card and to a network share. The official P1465-LE datasheet lists support for a microSD/microSDHC/microSDXC card and recording to network-attached storage (NAS). A network video recorder (NVR) is a separate local recorder; see what an NVR system is if you need that distinction.

Card or drive size is not the same as retention time. Estimate days of video with the NVR storage calculator. How long footage is kept, including cloud history, is covered in how long security cameras keep footage. Whether recording continues when the internet is down depends on local storage and power; that is explained in do security cameras record without internet.

ONVIF Profiles S, G, and T

ONVIF publishes official profile pages that define interoperable features. Do not treat the word “ONVIF” on a box as enough; read the profile letters.

  • Profile S is for basic video streaming. ONVIF says a Profile S device can send video over an IP network to a Profile S client, and that the client can configure, request, and control that streaming. The official page also states: “Profile deprecation in process; last date of product conformance submissions is March 31, 2027.”
  • Profile G is for edge storage and retrieval. ONVIF says a Profile G device can record video over an IP network or on the device itself, and a Profile G client can configure, request, and control that recording.
  • Profile T is for advanced video streaming. Official features listed on that page include H.264 / H.265 video compression, imaging settings, motion alarm and tampering events, metadata streaming, and bi-directional audio.

The official P1465-LE datasheet lists ONVIF Profile G, Profile M, Profile S, and Profile T, with specifications at onvif.org. Profile M appears on that datasheet; this article explains S, G, and T from the official ONVIF profile pages named above.

DORI and IEC 62676-4

Resolution becomes useful when you convert it into pixel density at a distance. Axis’s official white paper “Pixel density based on IEC 62676-4:2014” says common operational requirements in video surveillance are detection, observation, recognition, and identification, summarized as DORI, and that the specifications for these requirements come from IEC 62676-4:2014. Axis also notes that these requirements are valid where visual video images are interpreted by human operators; other definitions apply for video analytics and for thermal cameras.

DORI level (IEC 62676-4:2014, via Axis) What Axis says it means Pixel density
Detection It is possible to determine whether or not any individual is present. 25 px/m
Observation It is possible to determine how many people are present and to see characteristic details of individuals, such as distinctive clothing. 63 px/m
Recognition It is possible for a viewer to determine whether or not an individual shown is the same as someone they have seen before. 125 px/m
Identification It is possible to identify an individual. 250 px/m

The later edition, IEC 62676-4:2025, uses a different set of operational requirements. Axis’s official 2025 white paper (September 2026) lists these pixel densities:

IEC 62676-4:2025 level (via Axis) Pixel density
Overview 20 px/m
Outline 40 px/m
Discern 80 px/m
Perceive 125 px/m
Characterize 250 px/m
Validate 500 px/m
Scrutinize 1500 px/m

This hub does not repeat full distance charts. To apply a density to a camera and a distance, use the resolution comparison and the lens distance calculator, and check which edition a vendor’s DORI row is based on.

A Real Spec Sheet, Quoted

The table below quotes the official AXIS P1465-LE Bullet Camera datasheet (PDF en-US-506718), accessed on November 11, 2026. These are not typical or invented values.

Spec on the datasheet Exact wording or value quoted from the official PDF
Model AXIS P1465-LE Bullet Camera (9 mm and 29 mm variants)
Resolution (16:9) 1920×1080 to 160×90; described as 2 MP
Image sensor 1/2.8″ progressive scan RGB CMOS; pixel size 2.9 µm
Lens and field of view 9 mm: varifocal 3-9 mm, F1.6-3.3, HFOV 117°-37°, VFOV 59°-20°, minimum focus 0.5 m (1.6 ft). 29 mm: varifocal 10.9-29 mm, F1.7-1.7, HFOV 29°-11°, VFOV 16°-6°, minimum focus 2.5 m (8.2 ft).
Minimum illumination 0 lux with IR illumination on. 9 mm: color 0.06 lux at 50 IRE F1.6; B/W 0.01 lux at 50 IRE F1.6. 29 mm: color 0.06 lux at 50 IRE F1.7; B/W 0.01 lux at 50 IRE F1.7.
WDR Forensic WDR: up to 120 dB depending on scene
IR illumination OptimizedIR, 850 nm IR LEDs. Range of reach: 40 m / 131 ft (9 mm) or 80 m / 262 ft (29 mm), or more depending on the scene.
Enclosure ratings IP66/IP67, NEMA 4X, and IK10. Environment section cites IEC/EN 60529 IP66/IP67 and IEC/EN 62262 IK10.
Power Power over Ethernet IEEE 802.3af/802.3at Type 1 Class 3. Typical 7.9 W, max 12.95 W.
Video compression H.264 (Baseline, Main, and High Profiles); H.265 (Main Profile); Motion JPEG; Zipstream; VBR/ABR/MBR H.264/H.265.
Storage microSD/microSDHC/microSDXC card; recording to network-attached storage (NAS).
ONVIF Profile G, Profile M, Profile S, and Profile T, with specifications at onvif.org.

AXIS P1385-B is cited only to show that lux figures on an official datasheet change with lens, frame rate, and WDR conditions. It is a barebone indoor box camera, so it is not used here as an outdoor IR, IP, or IK example.

Frequently Asked Questions

How do I read a security camera spec sheet?

Start with the job the camera has to do, then read each published figure with its test conditions. Resolution and sensor size tell you pixel count and the sensor format. Lens focal length and field of view tell you how wide the scene is. IR range, WDR in dB, and minimum illumination in lux describe night and mixed light, but only with the stated conditions. IP and IK ratings describe the enclosure. PoE class, codec and bitrate, storage, ONVIF profiles, and DORI or IEC 62676-4 pixel density cover power, video load, recording, interoperability, and detail at a distance. The table at the top of this page is the checklist.

Are vendor WDR ratings in dB comparable?

Not unless the test method is stated and is the same. Axis’s official WDR white paper says dynamic range is usually specified as a dB value, but actual WDR performance is difficult to measure and also depends on the scene, motion, and image processing. A camera with a lower stated dB value can outperform one with a higher dB value. IEC 62676-5 exists to define how performance values in camera specifications should be described and measured.

Why do minimum illumination (lux) numbers differ so much?

They are only meaningful with the test conditions. Official Axis datasheets list lux at a stated IRE level and F-stop, and they change the number when the lens, frame rate, or WDR setting changes. The AXIS P1385-B datasheet, for example, lists color 0.05 lux at 50 IRE, F1.4 under one 25/30 fps Forensic WDR condition, and color 0.1 lux at 50 IRE, F1.4 at 50/60 fps with Lightfinder 2.0. A lux figure with no IRE, F-stop, or method should not be compared with one that states those conditions.

What is the difference between an IP rating and an IK rating?

An IP rating comes from IEC 60529 and describes protection against solids, dust, and water. An IK rating comes from IEC 62262 and describes protection against external mechanical impact. They answer different questions. AXIS P1465-LE is listed as both IP66/IP67 (IEC/EN 60529) and IK10 (IEC/EN 62262). IP66 is a powerful-jets test; IP67 is brief immersion under defined conditions. Axis’s official guide lists IK10 at 20 J.

What are ONVIF Profiles S, G, and T?

They are official ONVIF interoperability profiles. Profile S covers basic video streaming and configuration. Profile G covers edge storage and retrieval: configuring, requesting, and controlling recording. Profile T covers advanced video streaming, including H.264 and H.265, imaging settings, motion and tampering events, metadata streaming, and bi-directional audio. ONVIF says Profile S is in a deprecation process, with a last date of product conformance submissions of March 31, 2027. Look for the specific profile letters on the datasheet, not only the word ONVIF.

What is DORI on a security camera datasheet?

DORI stands for detection, observation, recognition, and identification. Axis attributes those four operational requirements, and the 25, 63, 125, and 250 px/m densities, to IEC 62676-4:2014. The 2025 edition of that standard uses a different set of levels, which Axis documents as Overview through Scrutinize, with densities from 20 px/m to 1500 px/m. Use those densities with a resolution or lens-distance tool; do not treat a megapixel number alone as a DORI distance.

Sources

Official IEC, IEEE/Ethernet Alliance, ONVIF, and manufacturer pages, accessed November 11, 2026.

  1. IEC Webstore, “IEC 60529:1989+AMD1:1999+AMD2:2013 CSV — Degrees of protection provided by enclosures (IP Code)”. Accessed November 11, 2026. Used for: Official identity of the IP Code standard.
  2. IEC Webstore, “IEC 62262:2002 — Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)”. Accessed November 11, 2026. Used for: Official identity of the IK code standard.
  3. IEC Webstore, “IEC 62262:2002+AMD1:2021 CSV”. Accessed November 11, 2026. Used for: Consolidated IK standard including amendment 1:2021.
  4. IEC Webstore, “IEC 62676-5:2018”. Accessed November 11, 2026. Used for: Official wording that this standard defines how video surveillance camera performance values should be described and measured in specifications.
  5. Axis Communications, “Quick guide to Axis datasheets”. Accessed November 11, 2026. Used for: Official explanation of IP digits and IK impact energies, citing IEC 60529 and IEC/EN 62262.
  6. Axis Communications, “Quick guide to Axis datasheets” (PDF, en-US-416740). Accessed November 11, 2026. Used for: The IP first- and second-digit tables and the IK energy table, including IK10 at 20 J and IK11* at 50 J.
  7. Axis Communications, “Wide dynamic range” white paper. Accessed November 11, 2026. Used for: Why a WDR dB value is not a complete or reliably comparable measure of WDR performance.
  8. Axis Communications, “Pixel density based on IEC 62676-4:2014” white paper. Accessed November 11, 2026. Used for: Official DORI definitions and 25 / 63 / 125 / 250 px/m densities.
  9. Axis Communications, “Pixel density” white paper PDF (en-US-403691). Accessed November 11, 2026. Used for: The same IEC 62676-4:2014 DORI table in PDF form.
  10. Axis Communications, “Pixel density based on IEC 62676-4:2025” white paper. Accessed November 11, 2026. Used for: The 2025 operational-requirement levels and pixel densities from Overview at 20 px/m to Scrutinize at 1500 px/m.
  11. Axis Communications, “IR in surveillance” (PDF, en-US-398429). Accessed November 11, 2026. Used for: 850 nm IR wording and that reach is assessed outdoors at night for real objects in real scenes.
  12. Axis Communications, “AXIS P1465-LE Bullet Camera” datasheet (PDF, en-US-506718). Accessed November 11, 2026. Used for: Quoted example values for resolution, sensor, lens and field of view, lux, WDR, IR range, IP/IK, PoE, codecs, storage, and ONVIF profiles.
  13. Axis Communications, “AXIS P1385-B Box Camera” datasheet (PDF, en-US-481007). Accessed November 11, 2026. Used for: Official example that lux figures change with lens, frame rate, and WDR conditions.
  14. Ethernet Alliance, “Overview of 802.3bt – Power over Ethernet standard” (WP V2p1). Accessed November 11, 2026. Used for: IEEE 802.3af / 802.3at / 802.3bt types, classes 1-8, and PSE/PD watt figures.
  15. ONVIF, “Profile S”. Accessed November 11, 2026. Used for: Basic video streaming definition and the Profile S deprecation note (last conformance submissions March 31, 2027).
  16. ONVIF, “Profile G”. Accessed November 11, 2026. Used for: Edge storage and retrieval: configure, request, and control recording.
  17. ONVIF, “Profile T”. Accessed November 11, 2026. Used for: Advanced streaming, including H.264/H.265, imaging settings, events, metadata, and bi-directional audio.

Plan the camera next

Use the resolution and lens tools to check detail at a distance, then size PoE, bandwidth, and storage from the figures on the official datasheet.

Resolution comparison     Lens distance calculator   

PoE budget calculator