Quick Answer
The resolution you need depends on how wide the scene is and how much detail you need in it, not on the megapixel label. IEC 62676-4:2014, as summarized by Axis, sets 125 pixels per meter for recognition and 250 pixels per meter for identification. A scene 20 feet wide needs 762 horizontal pixels for recognition and 1,524 for identification, so a 2MP (1920 px) camera covers both. A scene 40 feet wide needs 1,524 and 3,048 pixels, which points to 2MP / 1080p for recognition and 8MP / 4K UHD for identification. These are center-of-image figures for a simplified model, so add a margin.
This page answers the buying question, “which resolution do I need for this scene?” For the pixel dimensions of each megapixel label, see the security camera resolution comparison. For a plain-language explanation of 1080p, 2K, and 4K, see security camera resolution explained. For distance from a specific lens, use the lens distance calculator.
The Pixel Density Rule Behind the Numbers
Axis explains that the pixel density model starts from the number of pixels needed across a human face, then converts that into pixels per meter or per foot by assuming an average face is 16 cm (6 5/16 in) wide. The four levels come from IEC 62676-4:2014. Axis states that they apply when human operators interpret visual video.
| Level (IEC 62676-4:2014, via Axis) | What Axis says it means | Pixels across a face | Per meter | Per foot |
|---|---|---|---|---|
| Detection | It is possible to determine whether or not any individual is present. | 4 px/face | 25 px/m | 8 px/ft |
| Observation | It is possible to determine how many people are present and to see characteristic details of individuals, such as distinctive clothing. | 10 px/face | 63 px/m | 19 px/ft (rounded: 20) |
| Recognition | It is possible for a viewer to determine whether or not an individual shown is the same as someone they have seen before. | 20 px/face | 125 px/m | 38 px/ft (rounded: 40) |
| Identification | It is possible to identify an individual. | 40 px/face | 250 px/m | 76 px/ft (rounded: 80) |
IEC 62676-4:2014 lists px/m. Axis datasheets use the exact conversions (19, 38, and 76 px/ft); the rounded 20, 40, and 80 px/ft values are common in practice. Axis notes that IEC 62676-4:2014 usually recommends at least 40 pixels across a face to identify someone, and says a higher density can add a safety margin in poor light or when people are not facing the camera. The tables below use the px/m values.
The rule gives you one formula: horizontal pixels needed = scene width in meters x pixel density (px/m). To work in feet, multiply feet by 0.3048 first.
Resolution Needed by Scene Width
Each cell is the scene width multiplied by the density, followed by the smallest resolution from our list (2MP / 1080p at 1,920 px, 4MP at 2,560, 5MP at 2,592, 8MP / 4K at 3,840, and 12MP at 4,000 pixels wide) that reaches it. These are calculated values, not measurements.
| Scene width | Observation (63 px/m) | Recognition (125 px/m) | Identification (250 px/m) |
|---|---|---|---|
| 6 ft (1.8 m) | 115 px 2MP / 1080p | 229 px 2MP / 1080p | 457 px 2MP / 1080p |
| 10 ft (3.0 m) | 192 px 2MP / 1080p | 381 px 2MP / 1080p | 762 px 2MP / 1080p |
| 15 ft (4.6 m) | 288 px 2MP / 1080p | 572 px 2MP / 1080p | 1,143 px 2MP / 1080p |
| 20 ft (6.1 m) | 384 px 2MP / 1080p | 762 px 2MP / 1080p | 1,524 px 2MP / 1080p |
| 30 ft (9.1 m) | 576 px 2MP / 1080p | 1,143 px 2MP / 1080p | 2,286 px 4MP |
| 40 ft (12.2 m) | 768 px 2MP / 1080p | 1,524 px 2MP / 1080p | 3,048 px 8MP / 4K UHD |
| 60 ft (18.3 m) | 1,152 px 2MP / 1080p | 2,286 px 4MP | 4,572 px More than 12MP |
| 80 ft (24.4 m) | 1,536 px 2MP / 1080p | 3,048 px 8MP / 4K UHD | 6,096 px More than 12MP |
| 100 ft (30.5 m) | 1,920 px 2MP / 1080p | 3,810 px 8MP / 4K UHD | 7,620 px More than 12MP |
“Scene width” means the width of the area the camera sees at the distance where the person stands, not the width of the whole image at the far end. A scene that needs more than 4,000 pixels is beyond a 12MP camera at that level of detail, so use more than one camera or move the camera closer.
Megapixel Calculator
Enter the width of the scene at the spot you care about, choose a level, and read the horizontal pixels required. The calculator uses the formula above.
Widest Scene Each Resolution Can Cover
This is the same arithmetic in reverse: the camera’s width in pixels divided by the density. For example, a 1,920 px wide image divided by 250 px/m is 7.7 m, or about 25 ft.
| Resolution | Detection (25 px/m) | Observation (63 px/m) | Recognition (125 px/m) | Identification (250 px/m) |
|---|---|---|---|---|
| 2MP / 1080p 1,920 px wide | 252 ft (76.8 m) | 100 ft (30.5 m) | 50 ft (15.4 m) | 25 ft (7.7 m) |
| 4MP 2,560 px wide | 336 ft (102.4 m) | 133 ft (40.6 m) | 67 ft (20.5 m) | 34 ft (10.2 m) |
| 5MP 2,592 px wide | 340 ft (103.7 m) | 135 ft (41.1 m) | 68 ft (20.7 m) | 34 ft (10.4 m) |
| 8MP / 4K UHD 3,840 px wide | 504 ft (153.6 m) | 200 ft (61.0 m) | 101 ft (30.7 m) | 50 ft (15.4 m) |
| 12MP 4,000 px wide | 525 ft (160.0 m) | 208 ft (63.5 m) | 105 ft (32.0 m) | 52 ft (16.0 m) |
Notice that the width a camera can cover grows with horizontal pixels, not with the megapixel number. 2MP to 8MP is four times the megapixels but only twice the width. The 4MP and 5MP sizes in this table differ by only 1.25% in width.
Worked Examples for Common Scenes
The widths below are assumptions chosen only to show the method. They are not measured data, and your scene will differ. Measure the width of your own scene where people will actually stand.
| Example scene | Assumed width | Recognition: smallest resolution | Identification: smallest resolution |
|---|---|---|---|
| Front door or porch | 10 ft | 381 px: 2MP / 1080p | 762 px: 2MP / 1080p |
| Garage door and driveway apron | 20 ft | 762 px: 2MP / 1080p | 1,524 px: 2MP / 1080p |
| Side yard or patio | 30 ft | 1,143 px: 2MP / 1080p | 2,286 px: 4MP |
| Small parking row | 60 ft | 2,286 px: 4MP | 4,572 px: More than 12MP |
| Wide yard or lot edge | 100 ft | 3,810 px: 8MP / 4K UHD | 7,620 px: More than 12MP |
What the Tables Leave Out
- Lens and distance. A pixel count says nothing about how wide the lens sees at a given distance. Use the lens distance calculator to turn focal length and sensor data into coverage.
- Light and compression. Axis lists light direction, optics quality, and image compression as factors that affect the result.
- The screen. Axis notes that when an external display is used, the ability to detect, observe, recognize, or identify depends highly on the screen’s resolution.
- Storage and bandwidth. More pixels usually mean more data. Check the cost with the NVR storage calculator and the IP camera bandwidth calculator, and see how long cameras keep footage.
- Other datasheet lines. Sensor size, IR, WDR, and lux matter as much as pixels. Our security camera specs explained guide covers them, and the NVR guide explains the recorder side.
FAQ
How many megapixels do I need for a security camera?
It depends on the scene width and the level of detail you need, not on a fixed megapixel number. Multiply the scene width in meters by the pixel density for your goal: 125 px/m for recognition or 250 px/m for identification under IEC 62676-4:2014, as summarized by Axis. The result is the horizontal pixels you need. A 20 ft wide scene needs 762 pixels for recognition and 1,524 for identification, and a 40 ft wide scene needs 1,524 and 3,048. Then pick the smallest resolution whose width in pixels is at least that number.
Is 2MP enough for a security camera?
Under the IEC 62676-4:2014 densities that Axis publishes, a 2MP / 1080p camera is 1,920 pixels wide. That covers a scene up to about 7.7 m (25 ft) wide for identification (250 px/m), 15.4 m (50 ft) for recognition (125 px/m), and 30.5 m (100 ft) for observation (63 px/m). Those are theoretical center-of-image values; lens quality, lighting, and compression can reduce usable detail, so leave a margin.
Do I need 4K (8MP) to identify someone?
Only if the scene is wide. An 8MP / 4K UHD camera is 3,840 pixels wide, which covers about 15.4 m (50 ft) at the identification density of 250 px/m. A scene about 25 ft wide or narrower is already covered by a 2MP camera at that density. Doubling the width in pixels from 1,920 to 3,840 is a fourfold increase in megapixels, and higher resolution generally needs more storage and bandwidth, which you can estimate with our NVR storage calculator and bandwidth calculator.
Is 5MP much better than 4MP for scene width?
Not for width. The 4MP size in our resolution comparison is 2,560 x 1,440 and the 5MP size is 2,592 x 1,944, so the 5MP camera is only 1.25% wider in pixels. The extra pixels are vertical. The scene width a camera can cover at a given density depends on horizontal pixels, so check the width in pixels on the datasheet.
Why do real cameras not match these tables?
The tables are a simplified model. Axis states that there is no guarantee that following the rule of thumb will let a camera fulfill the operational requirements, and that light direction, optics quality, and image compression also affect the result. Axis also notes that the specifications are valid when human operators interpret visual video, that analytics and thermal cameras use other definitions, and that the screen used to view the footage matters. Axis suggests that a higher pixel density can provide a safety margin for worst-case conditions.
What changed in IEC 62676-4:2025?
Axis documents the 2025 edition with a different set of levels, from Overview at 20 px/m to Scrutinize at 1500 px/m, including 125 px/m (Perceive) and 250 px/m (Characterize). This page uses the 2014 detection, observation, recognition, and identification densities, because those are the ones most datasheets and installers still quote. The calculator below accepts a custom px/m value if you want to test another level.
Sources
- Axis Communications, “Pixel density based on IEC 62676-4:2014” white paper. Accessed November 20, 2026. Used for: The detection, observation, recognition, and identification definitions and the 25 / 63 / 125 / 250 px/m densities, the 16 cm face assumption, and the model’s limits.
- Axis Communications, “Pixel density based on IEC 62676-4:2025” white paper. Accessed November 20, 2026. Used for: The 2025 levels from Overview at 20 px/m to Scrutinize at 1500 px/m.
- IEC Webstore, “IEC 62676-4:2025 Video surveillance systems for use in security applications, Part 4: Application guidelines”. Accessed November 20, 2026. Used for: Official identity of the standard.
- ITU-R Recommendation BT.709, HDTV parameter values. Accessed November 20, 2026. Used for: The 1920 x 1080 pixel size.
- ITU-R Recommendation BT.2020, UHDTV parameter values. Accessed November 20, 2026. Used for: The 3840 x 2160 pixel size.
- IC Realtime: Resolution reference guide. Accessed November 20, 2026. Used for: The pixel sizes used for 4MP, 5MP, and 12MP.
We calculated every figure on this page from the published densities and the pixel sizes listed in the sources. We did not test any camera.
